Buyer's Guide

If a laptop gets wet is it ruined

If a laptop gets wet is it ruined? Do you think you’re the lazy and reckless one when it comes to gadgets? If it is, then this article is the right one for you. Spilling liquid on our laptop or other devices is a widespread practice.

As much as these inventions make our lives easier, technical issues can be of real concern to consumers, whether it’s a dramatic drop from a smartphone height or something like that.

Spilling something over your laptop, phone, or tablets while you’re working is yet another incident that must have happened to almost everyone in their lives at least once.

If a laptop gets wet is it ruined?

It can take place at the most unexpected time, despite being careful. Under such circumstances, however, do not lose your cool and save your gadget from being completely ruined. As people panic, they don’t know what to do and start to do anything to protect their device that will further mess up the situation.

It’s important to note that time is essential if your laptop gets wet. You have to turn it off, unplug it, and immediately split the battery. It’s counting every second. Do not worry about taking the appropriate steps to turn it off, either–press the power button until your PC shuts down.

What to do if laptop gets wet

Unluckily, if your laptop gets wet by coffee or any other liquid then you have to follow below-mentioned steps to save your laptop:

Step1: Unplug any easily detachable components, flash drives and DVDs. You have to also unplug your mouse and other cables. Leave your laptop bare.

Step2: Dry the machine outside. Hold it upside down and wipe any wet surfaces you see with a towel or other lint-free absorbent fabric, open your laptop as far as it goes.

The type of liquid matters: the least corrosive is water, while the most harmful are sugar and alcoholic liquids. Either way, by drying the computer immediately, the aim is to mitigate their effects as much as possible.

Step3: At this point, if it is still applicable, we would recommend that you take advantage of the warranty or take your machine to a repair shop.

But, if you don’t want to have a professional look at it for you, you can take a few more steps to try to dry out your laptop. Please note, however, that neither Digital Trends nor the author assumes any responsibility for the damage caused by separating your laptop.

Break it down

While years of laptops have made it easy to open them and remove components, modern-day laptops don’t do. Unless yours makes the process relatively painless, we wouldn’t recommend doing them a lot, as it’s easy to damage a laptop by taking it apart, and the last thing we want to do is make the situation worse. That said, if your computer allows, here are some steps you can take.

Step 1: If you have not already, and your laptop allows, remove your battery, usually by pressing a switch or button on your laptop’s underside.

Step 2: If you are concerned about liquid flowing through the entire system to components such as your memory and storage drive, you can also remove the parts. You will find panels on some laptops that enable them to be removed on the underside.

However, in most situations, you’ll need to remove them using a Phillips or Torx screwdriver. Press the side clips with the memory to eject each stick. You’ll probably need to undo more screws to free it from the frame with the solid-state drive or hard drive. Be sure to detach it carefully from the ports or cables for power and data connection.

Step 3: To check for any sign of wetness or corrosion, examine each component you have removed. Any wet parts must be dried, but if the liquid is anything but water, you’ll want to wipe it off with 99 per cent isopropyl alcohol (you can use a cotton swab)–this will dissolve gunk without causing any damage and evaporate without leaving any residue.

Step 4: Once you’ve finished, in a warm, dry area, you’ll want to leave everything alone to air-dry for 2-3 days. A fan will accelerate the drying process. Please do not use a hairdryer because it may cause static problems.

Once your machine has been picked apart, and the components have been given time to dry, you can follow the reverse instructions to put your laptop back together and see if it works.

Hopefully, everything is going to be okay, but if not, you’re going to want to take it to repair center.

What to do if laptop cannot be taken apart?

What if you have a MacBook or Surface Book 2 or any other laptop that refuses to be removed? This situation reduces your options dramatically, so you’ll need to take it to a repair centre.

Between the times you spill liquid on your keyboard and the time you take it to the store, here’s what you can do: keep your machine upside down, wipe away with a towel any visible wetness.

Then put it on a dry surface; a great option is a large bag of rice because rice is sufficiently absorbent to help extract any water that makes its way into your keyboard’s crevices.

Use a big container, plenty of rice, and put everything in a warm, dry room. You can switch on a fan to fasten the process along until the time when you take the PC to a repair store.

What to do if you spill liquid on a laptop?

Remember, the essence of speed. The faster you follow this guide, the more likely your drowning laptop will be saved.

Step 1 – Turn it off

Power off the laptop as quickly as possible to save it immediately. If you are working on a crucial document hold down the power key for about five seconds and the computer will shut down all power.

If the laptop runs off a power outlet cable, make sure that you switch it off at the wall before removing the power lead.

Step 2 – Turn it upside down

Turn the laptop upside down as quickly as possible to stop the water from entering the machine.

By opening the laptop and placing it as an upside-down V on a flat surface, you can prevent further water damage to the computer or screen.

Step 3 – Remove the laptop battery

Remove laptop battery from the laptop. This will prevent water from reaching the unit of the battery and may cause an electrical hazard.

Remember; don’t try to do this until you unplug the laptop from a power outlet.

Step 4 – Remove any peripheral devices

Remove any devices that can be mounted on the laptop, such as USB dongles and SD cards. If you can unplug the keyboard from your computer and clean any water.

Advanced steps to follow if your laptop gets wet

If you are dealing with a severe spillage instead of an unfortunate splash, you may need to go to extra lengths to protect your laptop’s internal components.

Step 5 – Soak up moisture

Open your window and continue to mop up as much of the mess as you can with a lint-free towel.

Step 6 – Remove components

If you are confident of what you are doing, unattache your hard drive, and RAM before damage to water can permanently harm these components.

Step 7 – Dry your laptop

Leave the laptop in a cool, dry place for 48 hours, allowing as much air as possible to reach the laptop.

Return the parts to the laptop and test it out after two days. Hopefully, these steps were enough to save your equipment, but if your laptop is non-responsive, all hope is not lost–a reputable PC technician may still save your computer.

Conclusion

Therefore, always be alert while using gadgets and use them carefully because if a laptop gets wet is it ruined.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button